Fast-drying surface-tolerant coating for marginally prepared surfaces. Protects steel structures in industrial facilities, bridges, offshore, oil tanks, piping, roofs, tank exteriors, marine weathering, water towers. NSF approved, VOC compliant.

Multi-purpose, high-solids VOC-compliant epoxy coating, compatible with marginally prepared surfaces. USDA approved for indirect food contact and NSF for potable water. Time to immersion: 7-days @ 70F.

As a maintenance or new construction coating Amerlock 400GFA protects both steel and concrete structures in severe environments, including marine structures, petroleum processing and storage facilities and other heavy industrial facilities. On offshore platforms, Amerlock 400GFA is suitable for use in splash and tidal zines, under-deck areas and helidecks as well as sub-sea facilities.

Used for marginally prepared steel and old coatings. Excellent resistanceto corrosive environments.

New construction primer over bare steel. Field maintenance over bare steel or over steel coated with organic/inorganic zinc.

New construction primer over bare steel. Field maintenance over bare steel or over steel coated with organic/inorganic zinc.

With the Proper topcoat, the primer withstands splash or spillage of water, solvents, chemicals and petroleum products, but also immersion in fresh water or seawater salt solutions and sour crude.

Prepared steel and concrete exposed to splash, spillage, fumes (chemical/weather).Tanklining for: potable water to 140?F, solvents, crude and fuel oils, alkaline and non-oxidizing salts. See chemical resistance list. NSF approved.

Prepared steel and concrete exposed to splash, spillage, fumes (chemical/weather). tanklining for: potable water to 140?F, solvents crude and fuel oils, alkaline and non-oxidizing salts. See chemical resistance list. NSF approved.

Chemical tank lining, wastewater and non-potable water tank lining, pipe lining and coating. Abrasion-resistant concrete and steel protection.100% solids, “0” VOC, high-performance epoxy.

Tank exteriors, structural steel, piping in chemical plants, refineries, etc. ballast tank service, anticorrosive

Industrial structural steel, machinery, piping, tank exteriors. . Marine applications including decks, Tank lining for fresh/salt water hulls, ballast tanks, and superstructures.Time to immersion 48 hrs @ 70°F. (385PA for non-immersion only)

Tank lining for fuel storage. Industrial maintenance. NSF for potable water. Marine: oil tanks, cargo holds. FDA/USDA approved for direct and indirect food contact.

Provides excellent corrosion protection for steel and as a weldable preconstruction primer.

Lining for immersion in crude oil, salt solutions, water, seawater, waste water treatment. Coating for pilings, pipe, and marine structures.

Amercoat 450HS can be used as a finish coat where attractive appearance and a wide range of corrosive resistance is required.

As a finish coat where attractive appearance and a wide range of corrosive resistance is required - chemical plants, pulp and paper mills, offshore platforms, petroleum refineries, containers.

DTM for light service on exterior, interior surfaces. Ideal for concrete, masonry. May use over tightly adhering old paint/ primed exists cracking faces. Flexible, cleanable, glossy finish; resist cracking, peeling, impact.

Corrosion-resistant primer for structural steel to be topcoated with alkyd or other conventional finish coats.

Topcoat designed to protect and enhance the appearance of power plants, industrial structures, wastewater treatment, railcars, marine exterior, and institutional maintenance.